DESCRIPTION:

- Parts in contact with the product are made of stainless ‘steel(316 L) and non-contact parts are made of stainless aasteel(304L)
- Used to fill low & high viscosity liquids, perfectly adaptable aato Pharmaceutical, Cosmetic, Food & Chemical .
- 4 volumetric Filling nozzles ( diving system ) driving by aaServo motor .
- The filling nozzles can be adjusted According to the bottles aadesign .
- Filling accuracy (± 0.5 %) per bottle and the filling amount aais ontrolled by an HMI screen .
- CIP system for clean in place.
- The machine is designed up to the international standards aaof cGMP & FDA

DESCRIPTION:

-  The 3D blender is widely used in pharmacy, chemical industry, food industry, scientific research, ect...
-  It is suitable for mixing dry-powder or granular materials with good flowing properties.
-  Powder can be loaded into the 3D blender through a wider opening manhole.
- multidirectional motion mechanism for a better blending process.
- final product can be discharged through a butterfly or slide valve.
- all the contact parts are made of either s.s304 or s.s316.
all the international standards and regulations has been respected: FDA, CE, ISO, cGMp, GMP.

 

DESCRIPTION:

- Introduction of raw materials (liquids and solids)
- Vacuum/Pressure system
- Agitator type anchor
- Homogenizer with pump function included
- Heating/Cooling jacket
- Temperature control
- Product recirculation
- Built-in CIP

DESCRIPTION:

- Parts in contact with the product are made of stainless
steel(316L) and non-contact parts are made of stainless
steel(304L).
- Used to fill low & high viscosity, perfectly adaptable
to Pharmaceutical, Cosmetic, Food & Chemical.
- The filling system can be switched to multiple options
- The machine can be designed by requests.
- Additional documentation is available upon request: IQ, PQ,
DQ, OQ, FAT, SAT.

DESCRIPTION:

Designed for vacuum operation up to -0.097Mpa (Vacuum system
included).
- Vacuum Hood - Mix bowl.
- HV planetary stirrer is driven motor supplied with variable
frequency drive.
- One  set of vacuum system
- Hydraulic system to raise & lower the agitator
- Discharge platen is supplied with silicone O-ring.
- Discharge platen is activated by means of a self-contained      hydraulic power unit with motor.

DESCRIPTION

Machine is designed for bundling packing cups. This forming system can fulfill the product coordination, paperboard feeding, synchronous positioning of paperboard and product, edge folding, glue spray and bottom sealing.
-  Patent for rotated feeding, precise location, wrapping paper for a variety of different specification can be adjusted flexibly.
-  Stainless steel major structure, accord with food industry demand standard.
-  High capacity of storage for paperboard structure, having a non‐stop increase put paperboard feature.
-  HMI touch screen

- Is widely used in Pharmaceutical, Cosmetics, Food and Chemical industries etc.
- It is suitable for mixing dry powder or granular materials with perfect flowing properties.
- Parts in contact with the product are made of Stainless Steel (316) and non-contact parts are made of Stainless Steel (304)
- The mixer designed according to international quality systems (ISO - GMP)
The blender consists of:
- Base holds the mixing vessel which made of stainless steel (304)
- Cylindrical vessel with two conical bases. The vessel rotates on horizontal axis. And the Inner edges wrapped to prevent accumulation of the material.
The vessel consists of:
- Circular cover, sealed with silicone gasket.
- Discharge hole fitted with manual butterfly valve.
- Guardrail (Profile) connected to a safety sensor to prevent the vessel from rotation while opening the rail.
- Sensor system stops the mixer in the desired position (The discharge hole to the bottom)

Used for preparing and mixing low & high viscosity products.
Perfectly adaptable to Pharmaceutical, Cosmetic & Chemical industries, can handle products like (Ointments, Creams,…etc ).
-Parts in contact with the product are made of stainless steel
(316 L) and non-contact parts are made of stainless steel
(304L) , The interior surface of mixer is mirror finish ( ≤ 0.5
μm ) and exterior one is mirror finish ( ≤ 0.8 μm )

Used in food industries (Labneh,... etc.)
The machine consists of:
1. Hopper equipped with a screw, which providing continuous flow of product.
2. Cutting mechanism: consist of a cutting blade to cut off the product according to a specific size.
3. Conveyor belt , where the portion are received and transported under the board.
4. Rectangular board, moves in a circular motion to give the product a ball shaped and it can be adjusted according to the required size

consists of two parts:
1- Bags Forming Section:
• Rollers carried the bags roll driven by servo motor.
• Sealed process done by a special mechanism according to the required dimensions and controlled by sensors.
2-Filling and sealing Section:
• Multihead weigher: provides regular continuous flow during the filling process equipped with electronic scales connected to the control panel to achieve the required packing quantity.
• Pouch Seal mechanism by thermal heaters and a knife, well-designed, long life.
• Conveyor to transfer bags out of the machine.
Technical specifications:
• The pouch dimensions can adjusted by sensors and a printed sign on the roll.
• Its form and fills various types of bags.
• Operating the machine has been eased with PLC system and touch screen

- The Machine is suitable for labeling round bottles in different size.
- The labeling affect is perfect, no creases, no bubble, grade high, to increase product competitiveness.
- The machine is designed and manufactured in accordance with international quality systems (ISO - GMP - FDA).
The machine consist of:
- Label Feeder used to feed paper on the bottle by using plastic reels which fastened on conveyor’s sides and driven by stepper motor and sensors system.
- The products are installed with code printer, codes the label directly while the labeling is proceeding.
- Label tracing by fork photo sensor.
- Bottles tracing by photocell.
- Unwind unit, equipped with reel brake.
- Rigid peeler bar to detach the label from the backing paper.
- Horizontal and vertical adjustment of labelers done by means of screws and hand wheels.

GALLON FILLING & SEALING & CAPPING MACHINE

The machine consists of:
1- Rotary tray to feed the gallons.
2- Conveyor to move the gallons from the receiver unit towards the filling machine.
3- Filling nozzles - fills using pistons with Teflon and works by diving mechanism (bottom up filling), where it’s inserted into the bottle to prevent foaming.
4- Aluminum foil feeder - consists of a rail to feed the foil automatically on cups and it’s driven by sensors system.
5- Sealing mechanism - consists of an automatic welding head (Thermal radiator), driven by sensors system
6- Rotary accumulation table.

YOGURT BARREL FILLING & CAPPING MACHINE – FLOW METER SYSTEM

The line is made up of :
-Milk Storage Unit
-Storage Tank (double jacket)
-Mixing tank (Double Jacket)
-Mixer - 1500 Continuous (Milk powder with liquid)
-Sanitary Centrifugal Pump
Pasteurization Unit - Automatic Plates Pasteurizer -Manual Separate milk cream
Homogenizer two Stage -Yogurt & Ayran preparation unit
Yogurt preparation tank (double jacket) -Ayran preparation tank (double jacket)
Milk fermentation Unit -Filling & packaging unit
Services Equipment:
CIP unit - Cooling Tower- Steam Bowler - Cooling Chiller -Continuous Screw Air Compressor
Laboratory equipment- Hot water generator - Stainless steel Loops (pipes and fittings)

AUTOMATIC SYRUP BOTTLES FILLING, CLOSING AND LABELING MACHINE ( Mono-block . GMP )

Liner & Rotary, made of Stainless Steel (316)
The machine is controlled by means of PLC and HMI
The Machine consist of :
1- Rotary tray to feed the bottles.
2- Conveyor connected with the body of machine, made of S.S (304) and consists of plastic belt with rails on the sides that can be adjusted based on used bottles diameter. The conveyor transfers the bottles during all work stages.
3- Balance tank equipped with level sensor to Ensuring regular & continues flow during filling process.
4- Filling nozzles - fills using pistons with Teflon and works by diving mechanism (bottom up filling), where it’s inserted into the bottle to prevent foaming during the filling.
5- Star wheels to position a bottles under each of filling nozzle, cap feeder & capping mechanism and it’s driven by stepper motor (step by step).
6- Cap feeder consists of bowl feeder and conveyor to feed caps automatically on the bottles and it’s driven by a sensors system that is compatible with machine’s work
7- Capping mechanism consists of a capping head which driven by sensors system that is compatible with machine’s work and it's able to calibrate the twisting strength.
8- Labeling machine suitable for labeling bottle in different size.

AUTOMATIC DROPPER BOTTLES FILLING, CAPPING AND LABELING MACHINE ( Mono-block . GMP )

AUTOMATIC FILLING, CAPPING  AND LABELLING MACHINE - MONOBLOCK WITH DROPPER
• Used in filling liquid and viscous materials.
The machine consists of:
• Conveyor - moves container into the machine, made up of plastic belt with rails on the sides (adjustable based on diameter and volume of the used containers).• Star wheel - Centralizes the containers under the work stages and it’s driven by servo motor (step by step).
• Balance tank - Equipped with materials level-sensor, sustains continuous and systematic flow to the machine during the filling process.
• Filling nozzles - fills using pistons (push/pull) with Teflon Seal and works by diving nozzle mechanism (bottom up filling), where it’s inserted into the containers.
• Plastic Caps feeder - made up of a container where caps are placed inside it to feeds caps on the containers and it’s driven by a sensors system which commensurate with the machine functions.
• Plastic Caps closing mechanism - made up of closing head carried on a mechanism and driven by a sensors system which commensurate with machine functions.
• Nozzles height can be adjusted based on size and height of the used containers.
• Droppers can  be adjusted based on size and height of the used containers.

- Used in filling liquid and viscous materials.
The machine consists of:
- Conveyor - moves container into the machine, made up of plastic belt with rails on the sides (adjustable based on diameter and volume of the used containers).
- Star wheel - Centralizes the containers under the work stages and it’s driven by servo motor (step by step).
- Balance tank - Equipped with materials level-sensor, sustains continuous and systematic flow to the machine during the filling process.
- Filling nozzles - fills using pistons (push/pull) with Teflon Seal and works by diving nozzle mechanism (bottom up filling), where it’s inserted into the containers.
- Plastic Caps feeder - made up of a container where caps are placed inside it to feeds caps on the containers and it’s driven by a sensors system which commensurate with the machine               functions.
- Plastic Caps closing mechanism - made up of closing head carried on a mechanism and driven by a sensors system which commensurate with machine functions.
- Nozzles height can be adjusted based on size and height of the used containers.